1000X Series  Data - Pro Ku-band PLL LNB



Applications

This series of LNB provides the best system BER performance and is most often used in applications requiring very fast data acquisition time or very low data rates. The single reliable connector supplies the 10Mhz external reference clock, the DC power from the receiver and the L-Band IF output signal to the receiver. External reference LNBs require specifically designed receivers.

  • Video: Not normally used.
  • Audio: SCPC digital or analog voice channels.
  • Data: Low speed SCPC data from 10 Kbps to 512 Kbps or any higher data rate.

Frequency Bands Available:

  1000XA 1000XB 1000XC 1000XP 1000XK
Typical Service North America Aussat Europe PanAmsat/Intelsat Intelsat
Input Frequency(GHz) 11.7-12.2 12.25-12.75 10.95-11.7 11.45-11.95 11.2-11.7
L.O. Frequency (GHz) 10.75 11.30 10.00 10.50 10.25
Output Frequency (MHz) 950-1450 950-1450 950-1700 950-1450 950-1450


Typical Specifications:

Noise Figure Options 0.9 to 1.3 dB
L.O. Stability Options (over temperature) Phase locked to 10MHz external reference.
L.O. Phase Noise External reference dependent
Conversion Gain 60 dB (0.5dB/25 MHz Segment)
Output Level (1dB compression) + 8 dBm
Power Requirements + 15 to + 24 Volts, 300 mA
Input VSWR Better than 2.2:1
Dimensions 5.3" x 2.8" x 1.6" (135 x 70 x 40mm)
Weight  16 ounces (500g)
Output Connector Standard F conector


Specifications subject to change without notice.
For more information contact Head Office

Back